A complete ultra-lightweight and compact kit with special cord, designed for skiers for crevasse rescue, rappelling, or roping up on a glacier to get out of a crevasse zone. Complete, ultra-lightweight and compact, the RAD SYSTEM (Rescue And Descent) kit allows skiers on mountain terrain to always have the equipment necessary for crevasse rescue, rappelling, or roping up on skis to get out of a crevasse zone. The kit contains a storage bag, 30 meters of RAD LINE 6 mm cord, carabiners, ascenders and a sling. Description Complete, ultra-lightweight and very compact kit: - 30 m of RAD LINE 6 mm cord, developed specifically for crevasse rescue, rappelling, and roping up on a glacier when getting out of a crevasse zone - 3 Sm’D SCREW-LOCK carabiners - 1 TIBLOC ascender - 1 MICRO TRAXION progress-capture pulley - 1 ST’ANNEAU 120 cm sling - equipment is contained in a storage bag Kit designed for action: - ideal bottom-of-the-pack solution for back-country skiers - cord is folded for immediate use, eliminating risk of knots or twists - two loops on the exterior of the pouch for attaching it to a harness or inside the backpack - sewn webbing loops on the top of the bag for attachment of all components of the kit - ice screw holder on the outside of the pouch Ultra-lightweight cord: - only 660 g for 30 m - flexible cord with rough-textured sheath for excellent handling and descent control when rappelling, and to aid in braking when arresting a crevasse fall - the hyperstatic cord has less than 2 % elongation, to facilitate rescue maneuvers and eliminate the yo-yo effect during rappels or fall arrest in a crevasse Specifications Material(s): aluminum, stainless steel, high-modulus polyethylene (HMPE), polyester, nylon Weight: 1000 g References References K011AA00 Guarantee 3 years Inner pack count 1

Multi-type, ultra-light 9.2 mm diameter rope for classic mountaineering and elite climbing performance The VOLTA 9.2 single rope has the light weight necessary for elite users, offering maximum longevity and performance in any conditions, thanks to its Duratec Dry treatment. Certified for all uses: single, half or twin, for multiple uses and maximum versatility according to the terrain. Description Ultra-light thin rope for elite climbers: - allows optimal functioning in the belay device - multi-type for use as a single, half or twin rope - for use in rock, mixed, snow or ice environments Greater longevity and ease of use in any conditions: - Duratec Dry treatment: dry treatment makes the rope more resistant to water, dirt and abrasion; handling, grip and other characteristics are retained longer in cold, wet conditions - UltraSonic Finish: the core and the sheath are bonded together at the rope ends by an ultrasonic process called UltraSonic Finish; gives greater durability and avoids frayed ends - ClimbReady coil: specific coil makes the rope ready for use; helps the user avoid initial uncoiling mistakes and increases longevity More effective belaying: - Middle Mark: indicates the middle of the rope to facilitate maneuvers - EverFlex treatment: special thermal treatment stabilizes the core strands and improves consistency; offers excellent grip and consistent handling over time Specifications Diameter: 9,2 mm Rope type: (CE EN 892, UIAA): multi-type - single, half, and twin rope Weight per meter: 55 g Percentage of sheath: 42 % Number of factor 1,77 falls: 6 (single rope), > 20 (half rope), > 30 (twin rope) Static elongation: 7.5 % (single rope), 7.5 % (half rope), 6 % (twin rope) Dynamic elongation: 33 % (single rope), 30 % (half rope), 26 % (twin rope) Impact force: 8.6 kN (single rope), 6.8 kN (half rope), 10.5 kN (twin rope) Construction: 40 carrier Material(s): nylon References References R35AO 030 R35AO 050 R35AO 060 R35AO 070 R35AO 080 R35AO 100 Color(s) orange orange orange orange orange orange Length 30 m 50 m 60 m 70 m 80 m 100 m Guarantee 3 years 3 years 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1 1 1 References R35AN 050 R35AN 060 R35AN 070 R35AN 080 Color(s) gray gray gray gray Length 50 m 60 m 70 m 80 m Guarantee 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1

Compact energy absorber ABSORBICA® is a compact energy absorber, for use in combination with a JANE lanyard to make a fall arrest lanyard. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It has two options for installation on the harness, according to the frequency of manipulation. Description Designed for use in combination with a JANE lanyard, to make a fall arrest lanyard with a maximum length of two meters Absorbs energy in case of a fall: - tearing of the energy absorber webbing limits the impact force on the user - works with users who weigh between 50 and 130 kg - progressive tearing reduces the deceleration on lightweight users Minimal bulk: compact, to facilitate handling Durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber Two options for installation on the harness, depending on use: - frequent connection/disconnection: using either a carabiner that is held in correct position by the STRING positioning accessory (included with the absorber), or a MICRO SWIVEL to avoid tangling - semi-permanent connection: using either a RING OPEN gated ring whose circular shape ensures optimal positioning, or a SWIVEL OPEN to avoid tangling Specifications Certification(s): CE EN 355, EAC References Length 22 cm Length with connectors 80 to 200 cm, depending on the connectors (more information in the Instructions for Use and in the technical tips at www.petzl.com) Weight 140 g Guarantee 3 years Inner pack count 1

Single lanyard with integrated energy absorber ABSORBICA®-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has an elasticized arm, to avoid hindering progression. Depending on the connectors used, ABSORBICA®-I is certified to American, European and Russian standards. Description Designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors Absorbs energy in the event of a fall: - tearing of the energy absorber webbing limits the impact force on the user - works with users who weigh between 50 and 130 kg - progressive tearing reduces the deceleration on lightweight users Minimal bulk: - compact energy absorber facilitates handling - FLEX version with 150 cm of elasticized webbing to avoid hindering progression Durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber Two options for installation on the harness, depending on use: - frequent connection/disconnection: with a carabiner held in correct position by the STRING positioning accessory (included with the lanyard) - semi-permanent connection: with a RING OPEN gated ring, whose circular shape ensures optimal positioning Two connector options for the end of the lanyard: a locking carabiner, or MGO OPEN connector with large gate opening Available in two lengths: 80 and 150 cm Specifications Material(s): polyester, nylon Certification(s): CE EN 355 when used with EN 362 connectors, ANSI Z359.13 12 feet when used with ANSI Z359.12 connectors, EAC References Version - FLEX Length without connectors 80 cm 150 cm Connector without connector without connector Length with connectors 90 to 130 cm, depending on the connectors (more information in the Instructions for Use and in the technical tips at www.petzl.com) 160 to 200 cm, depending on the connectors (more information in the Instructions for Use and in the technical tips at www.petzl.com) Weight 270 g 320 g Guarantee 3 years 3 years Inner pack count 1 1

Single lanyard with integrated energy absorber ABSORBICA®-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has an elasticized arm, to avoid hindering progression. Depending on the connectors used, ABSORBICA®-I is certified to American, European and Russian standards. Description Designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors Absorbs energy in the event of a fall: - tearing of the energy absorber webbing limits the impact force on the user - works with users who weigh between 50 and 130 kg - progressive tearing reduces the deceleration on lightweight users Minimal bulk: - compact energy absorber facilitates handling - FLEX version with 150 cm of elasticized webbing to avoid hindering progression Durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber Two options for installation on the harness, depending on use: - frequent connection/disconnection: with a carabiner held in correct position by the STRING positioning accessory (included with the lanyard) - semi-permanent connection: with a RING OPEN gated ring, whose circular shape ensures optimal positioning Two connector options for the end of the lanyard: a locking carabiner, or MGO OPEN connector with large gate opening Available in two lengths: 80 and 150 cm Specifications Material(s): polyester, nylon Certification(s): CE EN 355 when used with EN 362 connectors, ANSI Z359.13 12 feet when used with ANSI Z359.12 connectors, EAC References Version - FLEX Length without connectors 80 cm 150 cm Connector without connector without connector Length with connectors 90 to 130 cm, depending on the connectors (more information in the Instructions for Use and in the technical tips at www.petzl.com) 160 to 200 cm, depending on the connectors (more information in the Instructions for Use and in the technical tips at www.petzl.com) Weight 270 g 320 g Guarantee 3 years 3 years Inner pack count 1 1

ABSORBICA-Y is a double lanyard with compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline, and when passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms, to avoid hindering progression. Depending on the connectors used, the ABSORBICA-Y is certified to American, European, and Russian standards. Designed for progression on a vertical structure or horizontal lifeline, and when passing intermediate anchors Absorbs energy in the event of a fall: - tearing of the energy absorber webbing limits the impact force on the user - works with users who weigh between 50 and 130 kg - progressive tearing reduces the deceleration on lightweight users Minimal bulk: - compact energy absorber facilitates handling - FLEX version with 150 cm of elasticized webbing to avoid hindering progression Durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber Two options for installation on the harness, depending on use: - frequent connection/disconnection: with a carabiner held in correct position by the STRING positioning accessory (included with the lanyard) - semi-permanent connection: using either a RING OPEN gated ring whose circular shape ensures optimal positioning, or a SWIVEL OPEN to avoid tangling Two options for connectors at end of lanyard: carabiners, or large-opening MGO OPEN connectors Available in two lengths: 80 and 150 cm Specifications Material(s): polyester, nylon, high-modulus polyethylene Certification(s): CE EN 355 when used with EN 362 connectors, ANSI Z359.13 12 feet when used with ANSI Z359.12 connectors, EAC

Accessory cords These rugged and durable cords are for guiding a victim during rescue, or for hauling equipment. Available in four diameters, in a 120 meter roll. Description Accessory cords for guiding a victim during rescue, or for hauling equipment Rugged construction Available in four diameters: 4, 5, 6 and 7 mm Specifications Material(s): nylon Certification(s): CE EN 564 References References R044AA00 R045AA00 R046AA00 R047AA00 Color(s) orange red green blue Diameter 4 mm 5 mm 6 mm 7 mm Length 120 m 120 m 120 m 120 m Weight per meter 10 g 15 g 24 g 31 g Tensile strength 4 kN 6 kN 9 kN 12 kN Guarantee 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1

Accessory cords These rugged and durable cords are for guiding a victim during rescue, or for hauling equipment. Available in four diameters, in a 120 meter roll. Description Accessory cords for guiding a victim during rescue, or for hauling equipment Rugged construction Available in four diameters: 4, 5, 6 and 7 mm Specifications Material(s): nylon Certification(s): CE EN 564 References References R044AA00 R045AA00 R046AA00 R047AA00 Color(s) orange red green blue Diameter 4 mm 5 mm 6 mm 7 mm Length 120 m 120 m 120 m 120 m Weight per meter 10 g 15 g 24 g 31 g Tensile strength 4 kN 6 kN 9 kN 12 kN Guarantee 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1

ALTITUDE is a very lightweight harness designed for mountaineering and ski touring. Thanks to its simple structure, it can be donned while wearing skis or crampons. The two gear loops and the retainers help organize and transport the equipment required for mountain activities. Description Designed for mountaineering and ski touring: - can be donned with both feet on the ground, while wearing skis or crampons - the DOUBLEBACK LIGHT buckle and fastening strap are easy to operate, even with gloves - comfortable to wear when walking or suspended Lightweight and compact: - only 150 g - minimal bulk when stowed in pouch - extremely thin and flexible waistbelt and leg loops, thanks to WIREFRAME technology. The HMPE (high-modulus polyethylene) strands that are used in the waistbelt and leg loops give optimal load distribution without the use of foam. Lightness and comfort of the harness make it practically unnoticeable when worn Simplicity, and capacity for carrying equipment: - streamlined design - single tie-in point - two gear loops for transport and organization of equipment - retainers with silicone interior on each leg loop, for carrying an ice screw Specifications Material(s): nylon monofilament, polyester, high-modulus polyethylene, aluminum Certification(s): CE EN 12277 type C, UIAA Harness comes in a protective carry bag References References C019AA00 C019AA01 C019AA02 Color(s) orange/white orange/white orange/white Size S/M M/L L/XL Waist belt 64-86 cm 74-96 cm 84-108 cm Leg loops 55-67 cm 60-73 cm 66-79 cm Weight 150 g 160 g 170 g Guarantee 3 years 3 years 3 years Inner pack count 1 1 1

D-shaped locking carabiner for attaching devices to a harness The Am'D asymmetrical aluminum carabiner has a D shape best suited for connecting a belay system or for holding equipment. Its ergonomics and Keylock system facilitate manipulations, even when wearing gloves. The Am'D carabiner is available in three locking system versions: manual SCREW-LOCK system, or automatic BALL-LOCK and TWIST-LOCK systems. Great functionality, thanks to its capacity and dimensions: - efficient shape for use on either end of the carabiner (belay systems) - carabiner can hold a large quantity of equipment Good handling and ergonomics: - D shape for good handling - shape designed for gripping with gloves on - Keylock system to avoid any involuntary snagging of the carabiner Available in three locking systems, each for different situations: - SCREW-LOCK: occasional use, dirty environments - BALL-LOCK: frequent use with practical automatic locking; secure use with triple-action opening - TWIST-LOCK: specific use when quick opening is key (e.g. at the end of a lanyard) and when connecting a GRIGRI to the harness Specifications Material(s): aluminum Certification(s): CE EN 12275 References References M34A TL M34A BL M34A SL M34A TLN M34A SLN M34A TLY Weight 75 g 75 g 70 g 75 g 70 g 75 g Locking system TRIACT-LOCK BALL-LOCK SCREW-LOCK TRIACT-LOCK SCREW-LOCK TRIACT-LOCK Color(s) gray gray gray black black gold Major axis strength 27 kN 27 kN 27 kN 27 kN 27 kN 27 kN Minor axis strength 8 kN 8 kN 8 kN 8 kN 8 kN 8 kN Open gate strength 7 kN 7 kN 7 kN 7 kN 7 kN 7 kN Gate opening 24 mm 25 mm 25 mm 24 mm 25 mm 24 mm Guarantee 3 years 3 years 3 years 3 years 3 years 3 years Inner Pack Count 1 1 1 1 1 1 References M34A BLY Weight 75 g Locking system BALL-LOCK Color(s) gold Major axis strength 27 kN Minor axis strength 8 kN Open gate strength 7 kN Gate opening 25 mm Guarantee 3 years Inner Pack Count 1

D-shaped locking carabiner for attaching devices to a harness The Am'D asymmetrical aluminum carabiner has a D shape best suited for connecting a belay system or for holding equipment. Its ergonomics and Keylock system facilitate manipulations, even when wearing gloves. The Am'D carabiner is available in three locking system versions: manual SCREW-LOCK system, or automatic BALL-LOCK and TWIST-LOCK systems. Great functionality, thanks to its capacity and dimensions: - efficient shape for use on either end of the carabiner (belay systems) - carabiner can hold a large quantity of equipment Good handling and ergonomics: - D shape for good handling - shape designed for gripping with gloves on - Keylock system to avoid any involuntary snagging of the carabiner Available in three locking systems, each for different situations: - SCREW-LOCK: occasional use, dirty environments - BALL-LOCK: frequent use with practical automatic locking; secure use with triple-action opening - TWIST-LOCK: specific use when quick opening is key (e.g. at the end of a lanyard) and when connecting a GRIGRI to the harness Specifications Material(s): aluminum Certification(s): CE EN 12275 References References M34A TL M34A BL M34A SL M34A TLN M34A SLN M34A TLY Weight 75 g 75 g 70 g 75 g 70 g 75 g Locking system TRIACT-LOCK BALL-LOCK SCREW-LOCK TRIACT-LOCK SCREW-LOCK TRIACT-LOCK Color(s) gray gray gray black black gold Major axis strength 27 kN 27 kN 27 kN 27 kN 27 kN 27 kN Minor axis strength 8 kN 8 kN 8 kN 8 kN 8 kN 8 kN Open gate strength 7 kN 7 kN 7 kN 7 kN 7 kN 7 kN Gate opening 24 mm 25 mm 25 mm 24 mm 25 mm 24 mm Guarantee 3 years 3 years 3 years 3 years 3 years 3 years Inner Pack Count 1 1 1 1 1 1 References M34A BLY Weight 75 g Locking system BALL-LOCK Color(s) gold Major axis strength 27 kN Minor axis strength 8 kN Open gate strength 7 kN Gate opening 25 mm Guarantee 3 years Inner Pack Count 1

D-shaped locking carabiner for attaching devices to a harness The Am'D asymmetrical aluminum carabiner has a D shape best suited for connecting a belay system or for holding equipment. Its ergonomics and Keylock system facilitate manipulations, even when wearing gloves. The Am'D carabiner is available in three locking system versions: manual SCREW-LOCK system, or automatic BALL-LOCK and TWIST-LOCK systems. Great functionality, thanks to its capacity and dimensions: - efficient shape for use on either end of the carabiner (belay systems) - carabiner can hold a large quantity of equipment Good handling and ergonomics: - D shape for good handling - shape designed for gripping with gloves on - Keylock system to avoid any involuntary snagging of the carabiner Available in three locking systems, each for different situations: - SCREW-LOCK: occasional use, dirty environments - BALL-LOCK: frequent use with practical automatic locking; secure use with triple-action opening - TWIST-LOCK: specific use when quick opening is key (e.g. at the end of a lanyard) and when connecting a GRIGRI to the harness Specifications Material(s): aluminum Certification(s): CE EN 12275 References References M34A TL M34A BL M34A SL M34A TLN M34A SLN M34A TLY Weight 75 g 75 g 70 g 75 g 70 g 75 g Locking system TRIACT-LOCK BALL-LOCK SCREW-LOCK TRIACT-LOCK SCREW-LOCK TRIACT-LOCK Color(s) gray gray gray black black gold Major axis strength 27 kN 27 kN 27 kN 27 kN 27 kN 27 kN Minor axis strength 8 kN 8 kN 8 kN 8 kN 8 kN 8 kN Open gate strength 7 kN 7 kN 7 kN 7 kN 7 kN 7 kN Gate opening 24 mm 25 mm 25 mm 24 mm 25 mm 24 mm Guarantee 3 years 3 years 3 years 3 years 3 years 3 years Inner Pack Count 1 1 1 1 1 1 References M34A BLY Weight 75 g Locking system BALL-LOCK Color(s) gold Major axis strength 27 kN Minor axis strength 8 kN Open gate strength 7 kN Gate opening 25 mm Guarantee 3 years Inner Pack Count 1

Ultra-light quickdraw Designed for alpine climbing and situations where every gram counts, the ANGE FINESSE quickdraw is ultra-light, compact and durable. Featuring Petzl's MonoFil Keylock technology and an H-shaped cross-section, ANGE carabiners are very lightweight and offer an optimal strength/weight ratio. Strong and ergonomic, the FINESSE sling provides a good grip. The STRING quickdraw sling protector maintains the proper orientation of the carabiner making it easier to clip. Available in two lengths and two carabiner sizes. Description Ultra-lightweight and durable quickdraw: - ultra-light ANGE carabiners with MonoFil gate - lightweight and compact FINESSE quickdraw sling. The ergonomic shape makes it easier to grab - size and strength/weight ratio of the carabiner are optimized, thanks to its specific profile and the H-shaped cross-section - the MonoFil Keylock gate ensures smoother opening and closing of the carabiner and a much longer lifetime compared to traditional wire gate carabiners Efficient to use: - the deflector works with the shape of the carabiner to promote proper positioning of the carabiner on the major axis, and helps with clipping - the tabs on the bottom of the carabiner help keep the STRING in place to better align the quickdraw sling along its major axis - the STRING quickdraw sling protector helps maintain the proper orientation of the carabiner and protect the carabiner attachment loop from wear Available in four versions to meet a variety of user needs: - ultra-light version: 10 cm sling with two ANGE S carabiners - compact version for managing rope drag: 17 cm sling with two ANGE S carabiners - compact version for easier clipping: 17 cm sling with one ANGE S carabiner on the anchor end and one ANGE L carabiner on the rope end - ergonomic version for easier clipping: 17 cm sling with two ANGE L carabiners Specifications ANGE S breaking strength: - major axis: 20 kN - minor axis: 7 kN - open gate: 9 kN - gate opening: 23 mm ANGE L strength: - major axis: 22 kN - minor axis: 7 kN - open gate: 10 kN Gate opening: 26 mm Capacity: 21 mm Material(s): aluminum carabiners, HDPE slings with nylon stitching, rubber STRING Certification(s): - carabiner: CE EN 12275 type B, UIAA - sling: CE EN 566, UIAA References References M057AA00 M057AA01 M057BA00 M057CA00 Length of sling 10 cm 17 cm 17 cm 17 cm Version ANGE S on top and bottom ANGE S on top and bottom ANGE S carabiner on top and ANGE L on bottom ANGE L on top and bottom Strength 22 kN 22 kN 22 kN 22 kN Weight 63 g 66 g 72 g 78 g Guarantee 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1

Lightweight carabiner with MonoFil gate The ANGE L carabiner represents the best of both traditional solid and classic wire gate carabiners. Petzl’s MonoFil technology and the H-shaped cross-section make it lightweight (34 grams) and offer an optimal strength-to-weight ratio. The shape of the nose and the Keylock system help prevent the carabiner from snagging when clipping and unclipping. It’s the ideal design for multi-pitch climbers looking to reduce weight while keeping the functionality of a standard size carabiner. Description Very lightweight, standard size carabiner: - Weighing 34 g, it helps lighten the load when mountaineering or climbing alpine rock or ice - Carabiner size and strength-to-weight ratio are optimized due to the H-shaped cross-section Easy to clip and unclip: - MonoFil gate opens and closes smoothly and offers a much longer lifetime compared to traditional wire gate carabiners; the wire gate is inset within the frame, reducing the chance of it rubbing against the rock - Keylock system is designed to avoid snagging on a gear loop, piton, rope, or webbing - Nose of the carabiner has a hole that allows ice, snow, or dirt to be cleared out - Flat carabiner spine provides stability when holding it in your hand or pinch clipping - Wide contact surface with the rope and bolt hanger for better rope glide and reduced wear on the carabiner Available in two colors: blue and dark gray Specifications Material(s): Aluminum Certification(s): CE EN 12275 type B, UIAA, UKCA References References M59 B M59 G Color(s) Blue Dark Gray Dimensions 60x95 mm 60x95 mm Weight 34 g 34 g Major axis strength 22 kN 22 kN Minor axis strength 7 kN 7 kN Open gate strength 10 kN 10 kN Gate opening 26 mm 26 mm Guarantee 3 years 3 years Inner Pack Count 1 1

Polyester sling Sling designed for setting up a belay or an anchor, or for extending an anchor point. Description Available in four lengths: - 60 cm, yellow - 80 cm, blue - 120 cm, green - 150 cm, red Specifications Strength: 22 kN Material(s): polyester Certification(s): CE, UIAA References References C40A 60 C40A 80 C40A 120 C40A 150 Color(s) yellow blue green red Weight 60 g 80 g 100 g 135 g Length 60 cm 80 cm 120 cm 150 cm Guarantee 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1

Polyester sling Sling designed for setting up a belay or an anchor, or for extending an anchor point. Description Available in four lengths: - 60 cm, yellow - 80 cm, blue - 120 cm, green - 150 cm, red Specifications Strength: 22 kN Material(s): polyester Certification(s): CE, UIAA References References C40A 60 C40A 80 C40A 120 C40A 150 Color(s) yellow blue green red Weight 60 g 80 g 100 g 135 g Length 60 cm 80 cm 120 cm 150 cm Guarantee 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1

Polyester sling Sling designed for setting up a belay or an anchor, or for extending an anchor point. Description Available in four lengths: - 60 cm, yellow - 80 cm, blue - 120 cm, green - 150 cm, red Specifications Strength: 22 kN Material(s): polyester Certification(s): CE, UIAA References References C40A 60 C40A 80 C40A 120 C40A 150 Color(s) yellow blue green red Weight 60 g 80 g 100 g 135 g Length 60 cm 80 cm 120 cm 150 cm Guarantee 3 years 3 years 3 years 3 years Inner pack count 1 1 1 1

System included with crampons that limits snow buildup under the crampons in any snow conditions. ANTISNOW features an original construction. Made of durable, bi-material, dual-density polymer, this is a flexible, high-performance anti-bott system that limits snow buildup of any type under the crampons. It is sold in pairs, to equip a pair of crampons. Description Very efficient against snow-balling in any type of snow Bi-material and dual-density, for great durability and efficiency Available in two versions: - for IRVIS crampons as of 2016 - for VASAK and SARKEN crampons as of 2016 Product sold in pairs Specifications Material(s): polymer References References T03A AS T05A AS Version IRVIS VASAK - SARKEN Guarantee 3 years 3 years Inner pack count 1 1

System included with crampons that limits snow buildup under the crampons in any snow conditions. ANTISNOW features an original construction. Made of durable, bi-material, dual-density polymer, this is a flexible, high-performance anti-bott system that limits snow buildup of any type under the crampons. It is sold in pairs, to equip a pair of crampons. Description Very efficient against snow-balling in any type of snow Bi-material and dual-density, for great durability and efficiency Available in two versions: - for IRVIS crampons as of 2016 - for VASAK and SARKEN crampons as of 2016 Product sold in pairs Specifications Material(s): polymer References References T03A AS T05A AS Version IRVIS VASAK - SARKEN Guarantee 3 years 3 years Inner pack count 1 1

Mobile fall arrester with locking function The ASAP LOCK mobile fall arrester is designed to facilitate handling during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In case of shock or sudden movement, the fall arrester locks on the rope and stops the user. The integrated locking function allows the user to immobilize the device in order to reduce the potential fall distance. The connection arm makes the system drop-resistant when passing intermediate anchors. The ASAP LOCK is used with an ASAP'SORBER or ASAP'SORBER AXESS energy absorber to work at a distance from the rope. Description Constant fall protection: - arrests falls, slides, and uncontrolled descents - works on vertical or angled rope - locks on the rope even if grabbed during the fall Integrated locking function allows the user to immobilize the device in order to reduce the length of a fall. In case of a strong wind, this function also prevents the rope from being blown upward Simple to use, and effective: - moves up or down the rope, without any manual manipulation of the device - easy to install and remove at any point on the rope - connection arm makes the system drop-resistant when passing intermediate anchors - used with an energy absorber to work at a distance from the rope: ASAP'SORBER or ASAP'SORBER AXESS. The latter can be used for loads of up to 250 kg in two-person rescue situations Specifications Material(s): aluminum, stainless steel, nylon Weight: 425 g Certification(s): CE EN 12841 type A when used with an ASAP’SORBER or ASAP'SORBER AXESS energy absorber, and an EN 1891 type A, 10-13 mm rope Certification(s): CE EN 353-2 when used with an ASAP’SORBER or ASAP'SORBER AXESS energy absorber, and an ASAP'AXIS 11 mm or AXIS 11 mm rope with a sewn termination Certification(s): EAC when used with an ASAP’SORBER or ASAP'SORBER AXESS energy absorber, and an EN 1891 type A, 10-13 mm rope Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 12 mm rope References References B071BA00 Guarantee 3 years Inner pack count 1

Energy absorber for ASAP or ASAP LOCK The ASAP’SORBER energy absorber may only be used with an ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length. Description May only be used with an ASAP or ASAP LOCK mobile fall arrester Allows the user to keep the rope at a distance in order to: - free up the work area - protect the rope from sharp tools and harmful contact points Absorbs energy in case of a fall: - tearing of the energy absorber webbing limits the impact force on the user - designed for users who weigh between 50 and 130 kg - durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion Available in two lengths, to provide the best balance between distance from the rope and reducing fall length Specifications Material(s): nylon, polyester Certification(s): CE EN 355, ANSI Z359.13 6 feet, EAC References References L071AA00 L071AA01 Length 20 cm 40 cm Weight 125 g 145 g Guarantee 3 years 3 years Inner pack count 1 1

Energy absorber for ASAP or ASAP LOCK The ASAP’SORBER energy absorber may only be used with an ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length. Description May only be used with an ASAP or ASAP LOCK mobile fall arrester Allows the user to keep the rope at a distance in order to: - free up the work area - protect the rope from sharp tools and harmful contact points Absorbs energy in case of a fall: - tearing of the energy absorber webbing limits the impact force on the user - designed for users who weigh between 50 and 130 kg - durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion Available in two lengths, to provide the best balance between distance from the rope and reducing fall length Specifications Material(s): nylon, polyester Certification(s): CE EN 355, ANSI Z359.13 6 feet, EAC References References L071AA00 L071AA01 Length 20 cm 40 cm Weight 125 g 145 g Guarantee 3 years 3 years Inner pack count 1 1

With its unique locking system, the ASAP sets the standard in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In the event of a shock load or sudden acceleration, the ASAP locks on the rope and stops the user. Depending on the intended use, the ASAP may also be combined with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber to work at a distance from the rope. Description Constant fall protection: - arrests falls, slides, and uncontrolled descents - works on vertical or angled rope - locks on the rope even if grabbed during the fall Simple to use, and effective: - moves up or down the rope, without any manual operation - easy to install and remove at any point on the rope - may be combined with an energy absorber to work at a distance from the rope: ASAP’SORBER or ASAP’SORBER AXESS. The latter can be used for loads of up to 250 kg in two-person rescue situations Certified to European and Russian standards when used with an OK TRIACT-LOCK carabiner Certified to American standards when used with a Bm’D or OXAN TRIACT-LOCK (international version) carabiner Specifications Material(s): aluminum, stainless steel Weight: 295 g Certification(s): CE EN 12841 type A, UKCA, when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed Certification(s): CE EN 353-2, UKCA, GB/T 24537-2009, when used with an OK TRIACT-LOCK carabiner and an ASAP’AXIS 11 mm rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed Certification(s): EAC when used with an OK TRIACT-LOCK carabiner and a 10-13 mm EN 1891 type A rope. An ASAP’SORBER or ASAP’SORBER AXESS energy absorber can be used when needed Certification(s): ANSI Z359.15 when used with an ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Bm’D or OXAN TRIACT-LOCK (international version) carabiner, a CAPTIV positioning bar, and a RAY 11 mm static rope with sewn termination Certification(s): XF 494-2004: FZL-Z-Q10/13 References References B070AA00 Guarantee 3 years Inner Pack Count 1

Ergonomic handled ascender Handled rope clamp for rope ascents, the ASCENSION features an overmolded grip and ergonomic upper part for a comfortable and powerful grip when pulling with one or two hands. The ASCENSION handled rope clamp has a wide lower hole for easily attaching two carabiners for a lanyard and footloop. Description Designed for ascending a rope Simple to use, and effective: - ergonomic molded handle allows a comfortable yet powerful grip - wide opening allows the handle to be easily grasped, even with thick gloves. - ergonomic upper part to maximize power when pulling with two hands - safety catch is totally integrated into the body of the ascender to help prevent snagging - toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or dirty ropes...) - wide lower hole allows the carabiners of the CONNECT ADJUST lanyard and FOOTAPE or FOOTCORD footloop to be easily attached - upper hole for clipping a carabiner around the rope Available in left-handed and right-handed versions Specifications Material(s): aluminum, stainless steel, plastic, rubber, nylon Weight: 165 g Rope compatibility: 8 to 13 mm Certification(s): CE EN 567, UIAA References References B17ALA B17ARA Color(s) black yellow Version left right Guarantee 3 years 3 years Inner pack count 1 1