Adjustable friction descender for canyoning For your first canyoning experiences! Designed for group use or learning, the PIRANA CLUB is an adjustable friction descender for canyoning. It has three rope installation options and allows you to adapt the degree of friction before initiating a descent. It works well when used right-handed or left-handed. The plastic ring makes rope installation easier, keeping the device connected to the harness and limiting the risk of dropping the device. Adjustable friction descender for use in groups or for your first canyoning excursions: - Three rope installation options allow you to select the degree of friction before initiating a descent - Sleek design to make instructions and visual inspections easier Easy to use: - Plastic ring keeps the connector positioned properly to facilitate rope installation while the device is connected to the harness, limiting the risk of dropping the device - Possible to set up for right-handed or left-handed use Available in two colors: black and green Specifications Material(s): Aluminum frame, thermoplastic elastomer (TPE) positioning ring Weight: 90 g Rope compatibility: 8 to 13 mm Meets the requirements of the EN 15151-2 standard, except the requirement for minimum dimensions of the attachment point. References References D005BA00 D005BA01 Color(s) Green Black Guarantee 3 years 3 years Inner Pack Count 1 1

Chunky chalk POWER CRUNCH chunky chalk improves grip when climbing. Available in three different bag sizes to meet the needs of climbers. Description Improves grip on rock or gym holds Mix of chalk powder and chunks to reduce dust Resealable and easy to use Available in three quantities (200, 300, and 500 g) Specifications Material(s): Magnesium hydroxide carbonate References References S034AA00 S034AA01 S034AA02 Weight 200 g 300 g 500 g Guarantee 3 years 3 years 3 years Inner Pack Count 1 1 1

Chunky chalk POWER CRUNCH chunky chalk improves grip when climbing. Available in two different bag sizes to meet the climber's needs. Description Improves grip on rock or gym holds Mix of chalk powder and chunks to reduce dust Resealable and easy to use Available in two quantities (200 and 300 g) Specifications Material(s): Magnesium hydroxide carbonate References References S034AA00 S034AA01 Weight 200 g 300 g Guarantee 3 years 3 years Inner Pack Count 1 1

POWER LIQUID non-airborne liquid chalk improves friction and grip on climbing holds. It dries quickly and limits hand perspiration within a few seconds of application. For an even more effective solution, POWER CRUNCH loose chalk can be used with it. Description Improves grip on rock or gym holds Liquid form allows even distribution on hands Bottle made from 100% recycled HMPE May be used with POWER CRUNCH chalk for even greater effectiveness Specifications Material(s): Magnesium hydroxide carbonate, isopropyl alcohol References References S035AA00 Volume 200 ml Guarantee 3 years Inner Pack Count 1

Very efficient loss-resistant progress capture pulley The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. The side plate locks when loaded and prevents opening of the pulley during use. The lower connection point can be used to create different types of hauling systems. Description Loss-resistant pulley: - allows a rope to be installed when the pulley is connected to the anchor Well suited for hauling heavy loads: - large diameter aluminum sheave mounted on sealed ball bearings for excellent efficiency - side plate locks when loaded and prevents opening of the pulley during use Versatile: - lower connection point for creating different types of hauling systems - toothed cam with self-cleaning slot optimizes performance under any conditions: frozen or dirty ropes... - may be used as simple pulley by locking the cam in the raised position Specifications Weight: 265 g Certification(s): CE EN 567, NFPA 1983 Technical Use, EAC Material(s): aluminum, stainless steel, nylon Min. rope diameter: 8 mm Max. rope diameter: 13 mm Sheave type: sealed ball bearings Sheave diameter: 38 mm Maximum working load: 2 x 2,5 = 5 kN Breaking strength - pulley: 11 kN x 2 = 22 kN Maximum working load - rope clamp: 2.5 kN Breaking strength - rope clamp: 4 kN Efficiency: 95 % References References P51 Guarantee 3 years Inner pack count 1

Very high-efficiency, drop-resistant progress-capture pulley with swivel Possible to open, even when attached to the anchor, the PRO TRAXION progress-capture pulley is designed for setting up haul systems. With a large diameter sheave mounted on sealed ball bearings and excellent efficiency, it is particularly suitable for hauling heavy loads. The swivel makes it easier to operate, allowing the pulley to be oriented under load and for direct connection of carabiners, ropes, or slings. Description Drop-resistant and easy to operate: - Triple-action opening of the moving side plate is quick and easy, even with gloves - Rope can be installed when the pulley is connected to the anchor - Red indicator provides a visual warning when the moving side plate is unlocked - Special side plate design protects the rope path Designed for hauling heavy loads: - Large diameter aluminum sheave mounted on sealed ball bearings for excellent efficiency - Swivel allows pulley to be oriented under load Versatile: - Swivel and auxiliary attachment point allow the use of carabiners, ropes, and slings for easier rigging - Toothed cam with self-cleaning slot optimizes performance under a variety of conditions, such as when the ropes are frozen or dirty - May be used as a simple pulley by locking the cam in the raised position - Auxiliary attachment point can be used to set up a haul system - Hole in the cam for installation of a remote control cord Specifications Weight: 295 g Certification(s): CE EN 567, CE EN 12278, CE EN 12841 type B, UKCA, NFPA 2500 Technical Use Pulley and Rope grab Material(s): Aluminum, stainless steel, nylon Min. rope diameter: 8 mm Max. rope diameter: 13 mm Sheave type: Sealed ball bearings Sheave diameter: 38 mm Breaking strength - pulley: 11.5 kN x 2 = 23 kN Breaking strength - rope clamp: 4 kN Efficiency: 95 % References References P055AA00 Guarantee 3 years Inner Pack Count 1

Flexible protection Flexible PROTEC protection helps protect a fixed rope from abrasion. It is quick and easy to install. Description To help protect a fixed rope from abrasion Rugged, lightweight sheath (without PVC) Velcro closure and clip for easy and quick installation Specifications Weight: 95 g References References C45 N Guarantee 3 years Inner pack count 1

Very lightweight sling in high-modulus polyethylene PUR'ANNEAU is a very lightweight sling with exceptional durability, thanks to its high-modulus polyethylene construction. It is particularly supple, for easy handling. Available in three lengths, color coded for easy identification of length. Description Lightweight and exceptionally durable, thanks to high-modulus polyethylene construction Very supple, for easier handling Comes in three sizes, distinguishable by color-coded stitching for easy identification in action: 60, 120 and 180 cm Specifications Material(s): 100% high-modulus polyethylene sling, nylon stitching Breaking strength: 22 kN Certification(s): CE EN 795 B References References G006AA00 G006AA01 G006AA02 Length without connector 60 cm 120 cm 180 cm Color(s) yellow red violet Weight 18 g 32 g 48 g Guarantee 3 years 3 years 3 years Inner pack count 1 1 1

Pick exclusively designed for dry tooling, for NOMIC and ERGONOMIC ice axes Designed for NOMIC and ERGONOMIC ice axes, the PUR'DRY pick is exclusively for dry tooling. The thickness of the pick, 4 mm along its entire length, makes it much stronger when torqued. The shape of the teeth on the lower part provides efficient hooking and improves the stability of the ice axe when switching hands. It also has hooking teeth on the upper part, for inverted use or for slotting the pick in cracks. Description Exclusively designed for dry tooling: - thickness of 4 mm along its entire length improves rigidity and strength when torqued - designed for efficient hooking and stability of the ice axe when switching hands - hooking teeth on the upper part, for inverted use or for slotting the pick in cracks Compatible with NOMIC and ERGONOMIC axes Specifications Pick type: 2 Material(s): steel Certification(s): CE, UIAA Compatible with NOMIC and ERGONOMIC axes References References U022BA00 Weight 140 g Guarantee 3 years Inner pack count 1

Pick designed specifically for ice climbing, intended for ice axes with modular heads Designed for ice axes with modular heads, the PUR'ICE pick is made especially for ice climbing. It gives excellent penetration in ice and removes very easily. Serrated on the upper part, the pick offers stable support when the ice axe is turned upside-down. Description Very good penetration in ice: - pick tapers to 3 mm at the tip - reduced pick height - weights may be used to optimize the balance of the ice axe Easy removal: - special profile of the pick - tapered upper edge for better ice cutting - beveled lower teeth Serrated on the top for efficient use when the ice axe is turned upside-down: - stable support for climbing snowy slopes - handle of ice axe protected from moisture Compatible with SUM'TEC, QUARK, NOMIC and ERGONOMIC ice axes Specifications Pick type: 1 Material(s): steel Certification(s): CE, UIAA Compatible with SUM'TEC, QUARK, NOMIC and ERGONOMIC axes References References U021CA00 Weight 105 g Guarantee 3 years Inner pack count 1

Versatile ice axe for technical mountaineering and ice climbing QUARK is a versatile ice axe designed for technical mountaineering and for ice climbing. Its balance and its ICE pick allow solid placements on any type of ice. The TRIGREST and GRIPREST handrests make it easy to handle and comfortable in any situation. They provide more efficient handle grip for difficult sections. Entirely modular, the QUARK ice axe adapts easily to technical, varied terrain: snow couloirs, gullies, north faces, icefalls... Description Versatile ice axe: - shaft curved below the head and GRIPREST QUARK handrest at the bottom of the shaft to protect the hands on ice climbs - shaft has a steel spike and is straight enough for use in piolet-canne mode - shaft is hydroformed for optimal grip in the middle of the shaft, for snow couloirs - over-molded, bi-material handle provides good grip while insulating from the cold - TRIGREST QUARK and GRIPREST QUARK handrests strengthen the grip on difficult sections - 550 g with PANNE or MARTEAU Efficient placement on any type of ice - ICE pick is tapered at the tip (3.3 mm) and versatile across all terrain: snow, ice and mixed - compatible with MASSELOTTE weights to modify the balance and improve the inertia of the ice axe Modular construction: - entirely modular head allows the technical aspects of the ice axe to be adjusted - compatible with Petzl accessories: PUR'ICE, MINI MARTEAU, MASSELOTTES... - TRIGREST QUARK handrest is height adjustable without tools - GRIPREST QUARK handrest folds in easily for planting the ice axe in snow - connection hole is compatible with V-LINK elasticated loss-prevention webbing - only 465 g, not including accessories Specifications Pick type: 2 Shaft type: 2 Material(s): aluminum, steel, glass fiber reinforced plastic Certification(s): CE, UIAA Sold with ICE pick, MARTEAU or PANNE, TRIGREST QUARK and GRIPREST QUARK handrests References References U019AA00 U019BA00 Length of shaft 50 cm 50 cm Version adze hammer Weight 550 g 550 g Guarantee 3 years 3 years Inner pack count 1 1

Versatile ice axe for technical mountaineering and ice climbing QUARK is a versatile ice axe designed for technical mountaineering and for ice climbing. Its balance and its ICE pick allow solid placements on any type of ice. The TRIGREST and GRIPREST handrests make it easy to handle and comfortable in any situation. They provide more efficient handle grip for difficult sections. Entirely modular, the QUARK ice axe adapts easily to technical, varied terrain: snow couloirs, gullies, north faces, icefalls... Description Versatile ice axe: - shaft curved below the head and GRIPREST QUARK handrest at the bottom of the shaft to protect the hands on ice climbs - shaft has a steel spike and is straight enough for use in piolet-canne mode - shaft is hydroformed for optimal grip in the middle of the shaft, for snow couloirs - over-molded, bi-material handle provides good grip while insulating from the cold - TRIGREST QUARK and GRIPREST QUARK handrests strengthen the grip on difficult sections - 550 g with PANNE or MARTEAU Efficient placement on any type of ice - ICE pick is tapered at the tip (3.3 mm) and versatile across all terrain: snow, ice and mixed - compatible with MASSELOTTE weights to modify the balance and improve the inertia of the ice axe Modular construction: - entirely modular head allows the technical aspects of the ice axe to be adjusted - compatible with Petzl accessories: PUR'ICE, MINI MARTEAU, MASSELOTTES... - TRIGREST QUARK handrest is height adjustable without tools - GRIPREST QUARK handrest folds in easily for planting the ice axe in snow - connection hole is compatible with V-LINK elasticated loss-prevention webbing - only 465 g, not including accessories Specifications Pick type: 2 Shaft type: 2 Material(s): aluminum, steel, glass fiber reinforced plastic Certification(s): CE, UIAA Sold with ICE pick, MARTEAU or PANNE, TRIGREST QUARK and GRIPREST QUARK handrests References References U019AA00 U019BA00 Length of shaft 50 cm 50 cm Version adze hammer Weight 550 g 550 g Guarantee 3 years 3 years Inner pack count 1 1

Small radius progression hook. Description Aid climbing hook for progression or positioning For hooking on small flakes and edges or drilled holes Small radius and contact point Specifications Material(s): steel hook, nylon and Dyneema® webbing Weight: 38 g References References P06 1 Guarantee 3 years

Openable cam-loaded rope clamp Simple to use and ergonomic, the RESCUCENDER is an openable cam-loaded rope clamp designed for use in haul systems as a tractor or progress capture device. Description Designed for use in haul systems as a tractor or progress capture device Simple to use, and ergonomic: - openable cam allows installation or removal of the rope clamp at any point on the rope - independent safety catches on each side of the device allow easy opening while reducing the risk of accidental opening. These safety catches are equipped with indicators that show when they are unlocked. - cam integrated into frame of device for ease of handling - large attachment hole to facilitate carabiner rotation - integrated cam spring helps avoid accidental snagging and increases durability Specifications Material(s): aluminum, stainless steel, nylon Weight: 260 g Certification(s): CE EN 567 for use with 9 to 13 mm rope Certification(s): CE EN 12841 type B, NFPA 1983 Technical Use, EAC for use with 10 to 13 mm rope References References B50A Guarantee 3 years Inner pack count 1

High strength, very high efficiency pulley The very high efficiency RESCUE pulley is designed for intensive use by rescue professionals. Description For rescue professionals Designed to handle heavy loads or for intensive use Large diameter sheave mounted on sealed ball bearings for excellent efficiency Accepts up to three carabiners to facilitate use Available in two colors: red and black Specifications Rope compatibility: 7 to 13 mm Sheave diameter: 38 mm Ball bearings: yes Efficiency: 95 % Maximum working load: 4 kN x 2 = 8 kN Weight: 185 g Certification(s): CE EN 12278, NFPA 1983 General Use References References P50A P50AN Color(s) red black Guarantee 3 years 3 years Inner pack count 1 1

Lightweight multipurpose descender/belay device for use with one or two rope strands, allowing the second to be belayed from the anchor The lightweight REVERSO is a multi-functional belay/rappel device designed for rock climbing, multi-pitch climbing and mountaineering. It can be used to belay a climber and to rappel, and in Reverso mode can be used to belay one or two second climbers. The specific design of the rope channels facilitates smooth rope glide and reduces wear. It is compatible with most rope diameters: single 8.5 to 10.5 mm, half 7.1 to 9.2 mm, and twin 6.9 to 9.2 mm. Description Simple to use: - feeding slack and catching falls are accomplished using standard belay techniques, always keeping a hand on the brake side of the rope - rope glides smoothly through the device - V-shaped friction grooves enable controlled braking - rope installation diagrams for belaying and Reverso mode are engraved on the device Multipurpose use for rock climbing, multi-pitch climbing and mountaineering: - can be used to belay a climber or to rappel on one or two rope strands - Reverso mode allows the user to belay one or two seconding climbers with assisted braking - release hole allows the belayer to give slack to a seconding climber using just one carabiner Lightweight and durable: - compact and ultra-lightweight: only 57 g - the rounded design of the rope slots limits wear and extends the life of the device - compatible with most dynamic rope diameters (single 8.5 to 10.5 mm, half 7.1 to 9.2 mm, and twin 6.9 to 9.2 mm) Specifications Weight: 57 g Rope compatibility: single ropes 8.5 to 10.5 mm, half ropes 7.1 to 9.2 mm, and twin ropes 6.9 to 9.2 mm Material(s): aluminum frame Certification(s): EN 15151-2, UIAA References References D017AA00 D017AA01 D017AA02 Color(s) gray green red/orange Guarantee 3 years 3 years 3 years Inner pack count 1 1 1

Compact, ultra-light ice axe for ski touring and freeriding Ultra-light and very compact, the RIDE ice axe goes everywhere with you for ski touring or glacier travel, without weighing you down. Solid placements thanks to the all-steel head, a pick tapered to 3 mm and a bent shaft. Description Highly technical: - ice axe with steel head offering the same performance as a classic ice axe - pick tapered to 3 mm at the end for good penetration in ice - curved shaft and machined grip for good handling Very lightweight: only 250 g Compact: with only 45 cm and a beveled spike, the axe can be stowed inside the pack: - reduces the risk of injury when the axe is attached to the outside of the pack - can be stowed inside the pack for more discretion and without risk of damaging the pack Specifications Pick type: 1 Shaft type: 1 Material(s): tempered steel, 7075 aluminum Certification(s): CE, UIAA, UKCA References References U04A 45 Length of shaft 45 cm Weight 250 g Guarantee 3 years Inner Pack Count 1

Compact self-braking descender for rope access, designed for experienced users RIG is a compact self-braking descender for rope access, designed for experienced users. It has an ergonomic handle that allows comfortable descent control. The AUTO-LOCK system allows users to easily position themselves at the work station without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness. Description Designed for experienced rope access workers Easy to use: - safety gate on the moving side plate allows the rope to be installed easily while the device remains connected to the harness, facilitating the passage of intermediate anchors - easy rope installation, thanks to the rope guide and markings - ergonomic handle allows the rope to be released and enables convenient descent control. Two possible descent modes: on the side plate or in the V-shaped friction channel - AUTO-LOCK system allows users to easily position themselves at the work station without having to manipulate the handle or tie off the device: as soon as the user releases the handle, the rope is automatically locked in the device. The automatic return system on the handle limits the risk of the device getting accidentally snagged - handle automatically switches to storage position when the rope is removed from the device, reducing the risk of accidental snagging when the descender is carried on the harness Versatile: - once locked, the rope can be taken up without having to manipulate the handle, allowing for easy short ascents, for example - cam can be manipulated to take up slack easily or belay a lead using climbing techniques The stainless steel wear plate improves durability by reinforcing the rope friction zone Descending a heavy load up to 200 kg Rope compatibility: 10 to 11.5 mm in diameter Available in two colors: yellow and black Specifications Material(s): aluminum, steel, nylon Weight: 400 g Maximum working load: 200 kg (more information in the Instructions for Use and in the technical advice at www.petzl.com) Certification(s): EN 341 type 2 class A, CE EN 12841 type C, CE EN 15151-1, NFPA 1983 Technical Use, EAC - EN 341 type 2 class A when used with PARALLEL 10.5 mm or AXIS 11 mm rope - EN 12841 type C when used with a 10 to 11.5 mm EN 1891 A rope - EN 15151-1 when used with a 9 to 11 mm rope - NFPA 1983 Technical Use when used with a 10 to 11.5 mm rope References References D021AA00 D021AA01 Color(s) yellow black Rope compatibility 10 to 11.5 mm 10 to 11.5 mm Guarantee 3 years 3 years Inner pack count 1 1

Ultra-lightweight, ultra-compact, pear-shaped screw-lock carabiner Keep your rack light with the ROCHA! This ultra-lightweight, ultra-compact, pear-shaped carabiner is ideal for multi-pitch climbing or mountaineering, where every gram counts. The H-frame provides a superior strength-to-weight ratio at just 45 grams. It is easy to use with a SCREW-LOCK locking system. Description Ultra-lightweight, ultra-compact, pear-shaped carabiner: - Only 45 g - H-frame for optimal strength-to-weight ratio - Compact shape is ideal for multi-pitch climbing and mountaineering, where every gram counts Easy to use for increased efficiency: - SCREW-LOCK locking system provides a good grip and effective locking - Visual indicator makes it easy to check that the carabiner is locked - Keylock system and smooth nose help prevent the carabiner from snagging during use - Easy to use when wearing mountaineering gloves Available in two colors: ORANGE and LIGHT GRAY Specifications Material(s): Aluminum Certification(s): CE EN 12275 type H, UIAA References References M027AA00 M027AA01 Weight 45 g 45 g Locking system SCREW-LOCK SCREW-LOCK Color(s) ORANGE LIGHT GRAY Major axis strength 20 kN 20 kN Minor axis strength 7 kN 7 kN Open gate strength 6 kN 6 kN Gate opening 20 mm 20 mm Guarantee 3 years 3 years Inner Pack Count 1 1

Articulated protector with rollers ROLL MODULE is an articulated protector with rollers designed to guide a moving rope and protect it from abrasion. It offers the possibility of adapting the number of modules to the terrain and of minimizing abrasion. Description To guide a moving rope and protect it from abrasion Vertical and horizontal rollers guide the moving rope with a minimum of rubbing Each module can be positioned independently to adapt to the terrain Modules are connected with quick links: the number of modules can be varied according to the terrain Product sold as a kit: 4 modules + 6 quick links + carry bag Specifications Weight: 1330 g References References P49 Guarantee 3 years Inner pack count 1

Pulley-carabiner that facilitates installation on anchors and devices ROLLCLIP Z is a pulley-carabiner with a gate opening on the non-pulley side to facilitate installation on anchors and devices. It is available in two locking systems: automatic TRIACT-LOCK system or manual SCREW-LOCK system. Description Easier handling: - sheave mounted on sealed ball bearings for excellent efficiency - gate opening on the non-pulley side, to facilitate installation on devices - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place H cross-section of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion Two locking systems available: - TRIACT-LOCK: automatic locking with triple-action gate opening - SCREW-LOCK: the manual screw-lock with red band provides a visual warning when the carabiner is unlocked Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN References References P75 TL P75 SL Locking system TRIACT-LOCK SCREW-LOCK Weight 110 g 105 g Certification(s) CE EN 362, EN 12278, UKCA, EAC CE EN 362, EN 12278, UKCA, EAC Gate opening 20 mm 21 mm Guarantee 3 years 3 years Inner Pack Count 1 1

8 mm diameter half rope with Duratec Dry treatment for multi-pitch climbing and mountaineering The RUMBA 8 mm half rope offers great versatility in multi-pitch climbing, mountaineering, and ice climbing. It has a reinforced sheath for great durability, and also features Duratec Dry water repellent treatment for enhanced performance under any conditions. Excellent grip and great handling make for easier manipulation. Description Multipurpose rope for multi-pitch climbing and mountaineering: - Duratec Dry treatment for use in rock, mixed, snow, or ice environments: water repellent treatment makes the rope more resistant to water, dirt, and abrasion; good handling, grip, and other characteristics are retained longer in cold, wet conditions - Two ropes can be clipped individually or together, depending on terrain or rope drag management Durable and easy to grip: - Excellent balance of diameter, weight, and bulk - 40-carrier grip for better control - Duratec Dry treatment extends the life of the rope - UltraSonic Finish: the core and sheath are bonded together at the rope ends by an ultrasonic process, which provides greater durability and helps avoid frayed ends Convenient: - Middle Mark: indicates the middle of the rope to facilitate maneuvers - EverFlex treatment: specific thermal treatment stabilizes core strands and improves consistency, providing excellent grip and consistent handling over time - ClimbReady Coil: special coil makes the rope ready to use, helps avoid initial uncoiling mistakes, and increases longevity Specifications Certification(s): CE EN 892, UKCA, UIAA Diameter: 8 mm Rope type: Half, twin Weight per meter: 44 g Percentage of sheath: 41 % Number of factor 1,77 falls: 7 (half), 22 (twin) Static elongation: 11 % (half), 6 % (twin) Dynamic elongation: 34 % (half), 34 % (twin) Impact force: 5.9 kN (half), 9.6 kN (twin) Construction: 40 carrier Material(s): Nylon References References R21BR 050 R21BR 060 R21BB 050 R21BB 060 Color(s) Red Red Blue Blue Length 50 m 60 m 50 m 60 m Guarantee 3 years 3 years 3 years 3 years Inner Pack Count 1 1 1 1

The SAKA chalk bag’s ergonomic shape makes it easy to access the chalk. It has a practical drawstring and cordlock closure system. A double textile brush slot can hold a variety of brush types. This eco-designed product is made with 95 % recycled materials. Description Ergonomic chalk bag for easy access: - Rigid rim helps the bag maintain its shape - Woven textile closure system prevents chalk from spilling out during transport - Double textile brush slot securely holds different brush types - Liner is sewn into the bottom so it remains in place when you take your hand out Eco-design: - Made of 95 % recycled materials (100 % polyester or nylon) - Chalk bags feature an irregular pattern, limiting fabric waste in production Every bag is unique! Specifications Material(s): 100 % recycled polyester, 100 % recycled nylon Weight: 80 g References References S039BB00 S039BB01 S039BB02 S039BB03 S039BB04 Color(s) DARK GRAY ROSE CHALK STRIPES ORANGE/WHITE WHITE DAZZLE Guarantee 3 years 3 years 3 years 3 years 3 years Inner Pack Count 1 1 1 1 1

The SAKA chalk bag’s ergonomic shape makes it easy to access the chalk. It has a practical drawstring and cordlock closure system. A double textile brush slot can hold a variety of brush types. This eco-designed product is made with 95 % recycled materials. Description Ergonomic chalk bag for easy access: - Rigid rim helps the bag maintain its shape - Woven textile closure system prevents chalk from spilling out during transport - Double textile brush slot securely holds different brush types - Liner is sewn into the bottom so it remains in place when you take your hand out Eco-design: - Made of 95 % recycled materials (100 % polyester or nylon) - Chalk bags feature an irregular pattern, limiting fabric waste in production Every bag is unique! Specifications Material(s): 100 % recycled polyester, 100 % recycled nylon Weight: 80 g References References S039BB00 S039BB01 S039BB02 S039BB03 S039BB04 Color(s) DARK GRAY ROSE CHALK STRIPES ORANGE/WHITE WHITE DAZZLE Guarantee 3 years 3 years 3 years 3 years 3 years Inner Pack Count 1 1 1 1 1